Most automobiles operate on fuel. When fuel mixes with the air, combustion occurs that powers the engine and makes the automobile move. However, to maintain the ideal fuel-air ratio, a device called a carburettor is required. A carburettor is a tube that allows air and fuel to find an inlet into the engine through attached valves. After that, it does the job of mixing these two components in amounts that are required to suit different driving conditions. However, just like most mechanical devices, these carburettors can be quite tricky to clean.
Grime, dust, and sand, all of this enters the carburettor and hampers its functioning. If not cleaned properly, these contaminants can cause long-lasting damage. This is exactly where an ultrasonic carburettor cleaner comes to the rescue. An ultrasonic cleaner comes equipped with a transducer. This transducer aims to generate sound waves, that in turn, produce microscopic bubbles. Now, it is these microscopic bubbles that remove all dirt particles and petrol residue from the carburettor. If not for an ultrasonic cleaner, these minute particles would be impossible to get at and clean manually.
Table of Contents
How To Use An Ultrasonic Carburetor Cleaner?
Now that we have learnt what purpose an ultrasonic carburettor cleaner serves, it becomes exceedingly essential to learn how to use it too. Proper use of these cleaners will help keep your carburettors running smoothly for longer durations. Here are a few steps giving a detailed description of how to proceed with the cleaning:
Step 1: Measure the dimensions of your automobile carburettor. Your carburettor should fit into your ultrasonic cleaner for the transducer to clean it. Thus, it is essential to select an ultrasonic cleaner of the right size. Generally, by the rule of thumb, you should opt for a cleaner that is one size larger than your carburettor.
Step 2: Remove components like float bowls, slides, and jets before placing the carburettor into the cleaner.
Step 3: Depending upon the kind of carburettor you have purchased, you have to select between the manual or digital cleaning controls.
IF YOU OPT FOR THE MANUAL ADJUSTMENT:
- Turn the knob given to set a timer between 1 to 20 minutes.
- Select a temperature range between 20 to 80 degrees Celsius.
IF YOU OPT FOR THE DIGITAL ADJUSTMENT:
- Use the LED display to select a cleaning time between 1 to 99 minutes.
- Choose a temperature anywhere between 0 to 80 degrees Celsius.
- Stop the cycle anytime mid-way to check on the temperature of the fluid and the amount of it present in the tank.
Step 4: Add cleaning fluid to the mixture. The cleaning fluid safely removes general soil stains, carbon, grease, and petrol residue. The process does not cause damage, darken, or corrode metal parts.
Step 5: The concentrate should be added to water in a ratio of 1 part concentrate to 10 parts of water. The operating temperature of the bath should be set between 50 to 80 degrees Celsius.
Step 6: Plug in the ultrasonic carburettor cleaner into any domestic socket as per your needs.
Step 7: Let the cleaner run for 15 to 20 minutes. If your carburettor is still tarnished or greasy, you can let the cleaner run for an additional 10 to 15 minutes.
Step 8: After the carburettor has been cleaned by the transducer, rinse it in tap water and leave it to dry for a couple of hours.
Remember, you can also clean multiple carburettors at once by placing them in the same ultrasonic cleaner. You will just have to invest in a much larger cleaner to be able to make enough space to accommodate multiple carburettors. Moreover, degassing is an additional function that can quickly remove air bubbles from the fluid solution, thereby enabling more efficient cleaning. However, it is not of much use here and is not available in all ultrasonic cleaners either.
Top 10 Best Ultrasonic Carburetor Cleaner Reviews from Amaon:Updated 2021
1. Kaimashi Ultrasonic Carburetor Cleaner 6.5L
Although this brand sells ultrasonic cleaners in many different sizes and capacities, we shall discuss the features of the 6.5L cleaner at length here. Operating at an optimum frequency of 40 kHz, all ultrasonic cleaners can be used to clean items with irregularities in their surface or rough edges. In addition to this, the heating option provided is beneficial in removing oil and wax residue. The LED display helps digitize the entire process too. Set a timer between 1-30 minutes and choose a temperature between 0-60 degrees Celsius.
The smaller components of the carburettor can stop functioning if met with great friction. To reduce this, a small stainless steel basket is provided with the model. Silicone pads and feet help mitigate drag forces and keep the cleaner from stumbling or moving. Moreover, to provide an even more safe experience, a dual backup fuse option is provided. It cuts off power to the ultrasonic carburettor cleaner in case of any overheating or current issues.
PROS
CONS
- Preset heating function, very useful in winter
- No grate over the upper drain
- Inclusion of small stainless steel basket
- The lid is cheaply made
- Sleep and standby mode
- The heater can turn out to be defective
- Silicone non-slip pads
- Slightly noisy
- Backup fuse
- It tends to smell even after cleaning
2. DareFlow Ultrasonic Cleaner 200W Heated Parts Cleaner 2L
This ultrasonic cleaner is specifically designed for small carburettors. It is well-equipped with a 2L item capacity and 1.5L liquid capacity, making it perfect for bicycle parts, medical and surgical equipment, miniature bearings, and guns. The cavitation bubbles released from the machine reach even the smallest of crevices to dislodge grime and dirt. With a maximum temperature bearing capacity of 80 degrees Celsius, the DareFlow Ultrasonic Cleaner is a highly recommended choice for all.
The package includes not just the cleaning unit and an instruction manual but also a pair of chemical resistant gloves. These chemical resistant gloves are not made from latex but from natural rubber. The natural rubber has properties that can shield your hands from any kind of acidic fluid. However, the cleaning machine does have a fair share of limitations. You need to stop it every 15 minutes to prevent overheating. There is no fuse like security backup, so you need to be extra careful.
PROS
CONS
- It comes with chemical resistant gloves
- Very small for some carburettors
- It comes with a small basket
- Overheats frequently
- Detachable power cord
- Costlier than other options available
- Specially designed cooling fan
- Difficult to clean
- Moisture-proofed PCB
- Issues encountered with switching on the device
3. ONEZILI 6L 180W Ultrasonic Carburetor Cleaner
This is a professional-grade product that is marketed by the ONEZILI brand that aims at delivering premium quality goods. Using the ultrasonic vibration and microscopic bubbles treatment method, the powerful transducers built into this sonic cleaner machine remove all oil, grease, and wax stains from carburettors. If you want to clean your carburettor extensively and remove all rust and tarnish, too, you can buy a specialist cleaning solution from the company’s website to use with the ultrasonic cleaner.
The heating temperature recommended for this particular machine is around 50 degrees Celsius. Given its 6L capacity, this cleaner can fit most medium-sized carburettors that come as part of motorbikes or small cars. Operating at a power of 180 W, this powerful ultrasonic carburettor cleaner is definitely worth the money. More delicate items should be placed inside the stainless steel basket provided to prevent any kind of wear and tear.
PROS
CONS
- It does not pinch the pocket
- It takes a long time to heat up
- Can even clean metal jewellery items
- Light indicators can fail to work sometimes
- 99-minute time setting option
- It works for 30 seconds and then shuts off
- Corrosion-resistant
- The front control panel can be defective
- It makes very little noise
- A little heavy and difficult to carry
4. Acmesonic Ultrasonic Cleaner 15L with Heater 360w
If you were looking for a high capacity product that large carburettors could fit into, the Acmesonic Ultrasonic Cleaner is a perfect choice! With 360 W ultrasonic cleaning and 450 W heating, this product removes all dust and petrol residue like none else! Moreover, given the features that this ultrasonic cleaner packs, the price it is being sold at is exceptionally reasonable and definitely will not hurt your wallet. The whole product body is composed of SUS304 material and can last for years on end.
Positive and negative sound pressure exuded by the transducer alternates to rhythmically clean the surface of your carburettors and give it a gleaming finish. The best part is that you can fit almost three small carburettors into this giant ultrasonic cleaner and save up some time too. However, given its capacity, the Acmesonic Ultrasonic Cleaner is bulky and cannot be carried around. The base, however, is sturdy and makes sure the cleaner stays stable when placed on any countertop or table.
PROS
CONS
- Affordable
- Quite heavy
- Excellent for cleaning
- No timer with heater
- Ideal for other motorcycle parts too
- Can overheat
- Guaranteed returns or replacement
- Instructions are unclear
- Easy to use
- The power cord can rip
5. CO-Z 30L Digital Professional Large Ultrasonic Carburetor Cleaning Machine
If you were looking for a jumbo-sized ultrasonic carburettor cleaner, look no further! With the power of 10 industrial transducers packed into one unit, this ultrasonic carburettor cleaner is nothing short of phenomenal. Even 10 minutes in this machine are enough for all your coins, jewellery pieces, cartridges, razor blades and so on to look as good as new! Operating at a power of 800 W, the heating effect produced by the CO-Z cleaner is truly commendable.
If you need to clean particular irregular machine parts too, this cleaner offers a unique feature: it can function even with the lid popped off. Without the lid, however, the heaters might struggle to maintain the optimum tank temperature. Refrain from leaning parts on the rim of the cleaner, as the vibrational motion might cause abrasion and ultimately damage your items. As long as the length and the width of the thing you want to clean fits within the stainless steel basket, you need not hesitate to clean a part that is too big to be submerged entirely within the cleaning fluid.
PROS
CONS
- One year warranty
- It takes a very long time to heat up with the lid removed
- It gets even the toughest rust stains out
- Very loud
- Very reasonable price
- Bulky design
- Drain valve in pristine condition
- The digital control panel might be defective
- Timer never malfunctions
- Unsatisfactory customer support from the company
6. Angel Pos 10L / 2.6 Gallon Ultrasonic Cleaner with Stainless Steel Basket 240W
Running at a voltage of 100-120 V with a frequency of 60 Hz, this ultrasonic cleaner is one of the top-rated products available commercially. Given its robust structural design, it can withstand even continuous harsh use for several years. The stainless steel basket and lid protect delicate mechanical parts from abrasive cleaning fluids that may corrode their surface. However, be careful not to place any brass or copper items directly into this cleaner as it will discolour them.
To clean copper and brass items, you need to invest in a unique cleaning solution available on Angel Pos’ official website. The ultrasonic cleaner cleans your carburettors, but what cleans the ultrasonic cleaner? Just rinse the cleaner under running tap water using some mild dish soap or detergent. The detachable power cord that comes as part of the package makes it extremely convenient to do so. In case you need additional details or information, the instruction manual holds all the answers to your questions.
PROS
CONS
- The instruction manual is straightforward to follow
- Makes excessive noise while working
- Great customer support
- Clunky construction
- Detachable power cord
- It can only withstand a temperature up to 60 degrees Celsius
- Industrial-grade cleaning done
- Discolours brass and copper if not used with a special solution
- 10 L capacity
- It does not remove old rust stains effectively
7. VIVOHOME Professional 3L Portable Touch Controllable Electric Ultrasonic Cleaner Machine
When it comes to exploring the world of ultrasonic carburettor cleaners, VivoHome is one of the most trusted brands out there. The company has built an excellent reputation for itself over the years, mainly owing to its line of decently-priced products and top-notch customer service. This 3 L portable ultrasonic cleaner is a miniature version of the bulky carburettor cleaners that cannot be hauled around. In contrast to its size, however, the machine is more effective than most of its bigger counterparts.
The steel tank is 1.5 mm or 0.6 inches in thickness, making it both sturdy and durable. The highest water level is marked inside the cleaner, and one should be sure never to exceed that line of reference. This can lead to improper cleaning or hamper the structural integrity of the carburettor cleaner. The preset digital timer feature helps heat the fluid quickly, making it an important asset, especially during winter. Overall, this VivoHome product also lives up to the company’s brand name, making it a practical and utilitarian choice for users.
PROS
CONS
- Guaranteed product replacement in case of defective items
- No drainage outlet
- Practical and premium product
- Limited capacity
- Digital LCD display
- The tank lid is difficult to clean
- Fuse backup to prevent excess heating
- Not ideal for delicate jewellery
- Preset heating timer feature
- The power switch fails to work sometimes
8. iSonic Commercial 2L Ultrasonic Carburetor Cleaner
This carburettor cleaner is built keeping very specific needs in mind. A 60W stack transducer is used in the construction of this model, restricting its use to very small carburettors and other metal items, dental and surgical equipment. The plastic housing not only gives the product a very sleek look but also conceals a lot of noise that stainless steel carburettor cleaners tend to amplify. The shape of the tank is also square and not rectangular, which renders a more uniform ultrasonic energy distribution.
All of these features give the iSonic cleaner an edge over its competitors in the market. Hooked beaker holders that come as part of the package offer convenience and utilities that a unit without it cannot attain. Suspended beakers make sure your metal parts do not get corroded due to friction while still ensuring optimum cleaning by keeping the items submerged in the cleaning fluid. This product is definitely unique and worth purchasing.
PROS
CONS
- Distinctive and practical design
- 30-minute rounds are not enough for deep cleaning
- Fixes flaws present in other models
- It uses up a lot of power
- Uses stack and not wafer transducers
- Pricier than other alternatives
- Unique square tank feature
- Plastic casing can get damaged easily
- Digitized display panel
- Not rust-proof
9. Kaimashi Ultrasonic Carburetor 28/40khz Dual Frequency Cleaner
This is the second Kaimashi ultrasonic carburettor cleaner to be included in this list. It is most definitely a worthy inclusion because this product takes on a new innovative idea and incorporates it into its cleaning mechanism. Usually, ultrasonic cleaners only run on the standard 40 kHz frequency. This particular model makes use of the semi wave and full-wave frequency, that is, 28 kHz and 40 kHz, respectively. The semi wave frequency is best suited for surface polishing, while the full-wave frequency is for more intensive, deep carburettor cleaning.
There is a handle attached to the ultrasonic cleaner that makes it easy to be carried around. Non-skid rubber feet minimize the risks of unwanted wobbling that might result in any kind of undesirable damage. The auto Stand-By, Sleep Mode, And Memory Function feature come in handy when you have other errands to run and cannot wait around near the cleaner to see when it finishes the cleaning process. The Degassing feature adds another feather to this product’s already significantly long feature list.
PROS
CONS
- User-friendly model
- Low heating power
- Heat dissipation feature
- Poor quality control standards
- 12 months warranty period
- No water level markings
- No water leakage
- Inadequate drainage system
- Unique dual-frequency feature
- Degassing feature not up to the mark
10. DYNVIM 3L Ultrasonic Carburetor Parts Cleaner
This sonic cleaner can accommodate items that are not longer than 220 mm or 8.66 inches. Thus, most small carburettors can easily fit into this device for effective cleaning. Although the timer setting allows you to set a time range between 1 to 30 minutes, this device yields the best results when items are left in for around 2 to 3 cleaning cycles. This comes approximately to around 1 to 1.5 hours of work time, which might cause heating issues in the long run.
The degassing and dewaxing cleaning modalities involve using heat to reduce the adhesion strength of oil and wax. This helps to enhance and improve the ultrasonic cleaning effect by a long shot. Other than the DareFlow Ultrasonic 200 W Cleaner, the DYNVIM cleaner is the only other one in this top 10 ultrasonic carburettor cleaners list that includes a pair of chemical resistant gloves in the package. This help combats the action of weak acids and alkali, thereby adding a layer of extra security.
PROS
CONS
- Perfect for more fragile precious metal items too
- Not efficient
- Portable machine design
- Heating issues arise often
- 0.79 gallons full volume capacity
- Only 0.63 gallons effective volume capacity
- Made of special die-casting SUS304 stainless steel
- The basket provided is too big and bulky
- Provides an intensive cavitation rinse
- Difficult to follow instruction manual
Ultrasonic Carburetor Cleaner Buying Guide
1.Always Measure The Dimensions Of Your Carburetor
To buy the right size carburettor cleaner, you first need to accurately measure your carburettor dimensions! Your carburettor has to fit into the ultrasonic cleaner snugly, leaving about 1 to 1.5 inches of space all around. If this space is not provided, strong frictional forces might significantly hamper your carburettor. Thus, when buying an ultrasonic cleaning device, always opt for a bigger size than required.
2.Give Preference To The SUS304 Stainless Steel Models
Although plastic casing is more noise-absorbent, it is not durable and deforms in a few months. The special SUS304 stainless steel ultrasonic carburettor cleaners are designed specially to be rust-proof and not corrode even after years of use. They are sturdy and reliable, with the only downside being the amount of noise they make while operating.
3.Select The Right Cleaning Fluid
Choosing the wrong fluid could chemically erode your carburettor. It is essential to know what fluid composition is best suited to your specific cleaning needs. Acidic solutions are those with a pH of 5.0 or lower, and they are formulated for removing lime deposits and rust stains from ferrous metals. In contrast to this, alkaline solutions are those with a pH of 10 or above and are used for cleaning tin, brass, zinc, copper, stainless, steel, and cast iron. In addition to these two, high caustic solutions work well at removing heavy waxes, oils, and grease stains from carburettors and their parts.
4.Opt For A Warranty-Backed Product
Like most electrical and mechanical devices, ultrasonic carburettor cleaners too are prone to malfunctioning after a certain period of time. To combat this issue, always opt for a product that is backed by a warranty policy and has a good network of customer service centres. In case you need to replace or repair any components or parts of the sonic cleaner, this will benefit you greatly.
FAQs Related To Ultrasonic Carburetor Cleaner
Q1.Can Ultrasonic Carburetor Cleaners Be Used For Any Other Purpose?
Yes, ultrasonic carburettor cleaners can be used for a variety of purposes. These include polishing jewellery, cleaning eye lenses and other optical parts alongside watches, dental and surgical instruments. In addition to this, you can clean metal tools, coins, and firearms too using these ultrasonic cleaners.
Q2.What Is The Difference Between Stack And Wafer Transducers Used In Sonic Cleaners?
A stack transducer has multiple transducers. Generally, 2 to 3, stacked together and mounted over a horn. A wafer transducer is just a thin disk. Wafer transducers utilize less power in general and, thus, cost much less than a stacked transducer. Stack transducers produce more vibrational frequencies, enabling more effective microscopic bubble generation, leading to better cleaning. Industrial grade carburettor cleaners usually make use of multiple stack transducers.
Q3.How Do I Stop My Ultrasonic Carburetor Cleaner From Overheating?
Try and keep a check on the cleaner while the cleaning process is going on to prevent any accidents. If you are using a higher capacity cleaner, try to buy a model that has a fuse backup system. It might cost more, but it is worth the money. The fuse backup ensures that if and when the device overheats, the power connection is immediately cut off.
Q4.How Do I Wash My Ultrasonic Cleaner After Use?
Rinse the unit with tap water and keep it out in the sun to dry. After this is done, wipe it clean with a cotton rag. In case you still see some residue remaining, use a sponge with some dish soap to wipe it off. In addition to thorough cleaning after every use, ultrasonic cleaners also need their filtration systems to be changed quarterly or yearly, depending on how much you use the device.
Final Words
With the help of this detailed article about ultrasonic carburettor cleaners, you now know everything there is to know about these modern, inventive devices! Although they were launched relatively recently into the market, their demand has been on a steady rise with more and more people becoming aware of the subject. Given how they can be used in a variety of ways, it comes as no surprise that they are becoming even more popular with each passing day.
Soon enough, ultrasonic cleaning will become the most widely used and efficient mode of cleaning, considering the amount of research being done on transducers and the vibrational effect of sound waves. Combined with a heating feature, these devices are indeed an incredible way to remove all grime, dirt, rust, petrol and diesel residue from your carburettors and are worth each penny that you invest in purchasing them.